ESP-3212 Breakout Board
The maker community is very excited about the production release of Espressif’s ESP-32. This is the popular ESP8266’s big brother - with added Bluetooth, a second core, tons more GPIOs, higher possible clock speed and hardware accelerated encryption all in a QFN48 (6mm x 6mm) package.
I’m not entirely sure whether I’m going to end up using the ESP-32 but it definitely looks like something I’d like to play with, so I ordered a few ESP-3212 modules from aliexpress earlier.
As the ESP-3212 board isn’t the most user friendly I’ll be needing a breakout board. I saw one appear on OSHpark’s shared projects page yesterday, but it looked a bit inefficient to me - and $11.90 for 3 - and it seems to be for Espressif’s own WROOM module. So I designed a more compact version which is about half the price at $6.15 for three.
Key differences with my board:
Mine’s designed for the ESP-3212, not the ESP32-WROOM from Espressif.
Kept the antenna within the curtilage of the breakout board - to keep it tidy and reduce the total footprint of the completed item. There’s no ground plane so this shouldn’t affect performance of the attenna (and I’ve done dreadful things to these PCB trace attennae before with very few ill effects!).
Broke out the bottom pins perpendicular to the others. This makes it less suitable for use in a breadboard, but I tend not to use these anyway.
Didn’t bother numbering the pins (don’t think it’s really necessary).
Of course, as I don’t have any ESP-3212 boards yet I haven’t tested, so order and use at your own risk! I’m a bit nervous that the Eagle library I used has a 1.5mm pin pitch, and I’ve not seen any specs for the ESP-3212 yet. But if it doesn’t work I’ve only lost 6 bucks!comments powered by Disqus